docker中不同容器間的訪問方法：

虛擬ip訪問

安裝docker時，docker會默認創建一個內部的橋接網絡docker0，每創建一個容器分配一個虛擬網卡，容器之間可以根據ip互相訪問。

[root@33fcf82ab4dd /]# [root@CentOS ~]# ifconfig ...... docker0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500         inet 172.17.0.1  netmask 255.255.0.0  broadcast 0.0.0.0         inet6 fe80::42:35ff:feac:66d8  prefixlen 64  scopeid 0x20<link>         ether 02:42:35:ac:66:d8  txqueuelen 0  (Ethernet)         RX packets 4018  bytes 266467 (260.2 KiB)         RX errors 0  dropped 0  overruns 0  frame 0         TX packets 4226  bytes 33935667 (32.3 MiB)         TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0 ......

運行一個centos鏡像， 查看ip地址得到：172.17.0.7

[root@CentOS ~]# docker run -it --name centos-1 docker.io/centos:latest [root@6d214ff8d70a /]# ifconfig eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500         inet 172.17.0.7  netmask 255.255.0.0  broadcast 0.0.0.0         inet6 fe80::42:acff:fe11:7  prefixlen 64  scopeid 0x20<link>         ether 02:42:ac:11:00:07  txqueuelen 0  (Ethernet)         RX packets 16  bytes 1296 (1.2 KiB)         RX errors 0  dropped 0  overruns 0  frame 0         TX packets 8  bytes 648 (648.0 B)         TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

以同樣的命令再起一個容器，查看ip地址得到：172.17.0.8

[root@CentOS ~]# docker run -it --name centos-2 docker.io/centos:latest [root@33fcf82ab4dd /]# ifconfig eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500         inet 172.17.0.8  netmask 255.255.0.0  broadcast 0.0.0.0         inet6 fe80::42:acff:fe11:8  prefixlen 64  scopeid 0x20<link>         ether 02:42:ac:11:00:08  txqueuelen 0  (Ethernet)         RX packets 8  bytes 648 (648.0 B)         RX errors 0  dropped 0  overruns 0  frame 0         TX packets 8  bytes 648 (648.0 B)         TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

容器內部ping測試結果如下：

[root@33fcf82ab4dd /]# ping 172.17.0.7 PING 172.17.0.7 (172.17.0.7) 56(84) bytes of data. bytes from 172.17.0.7: icmp_seq=1 ttl=64 time=0.205 ms bytes from 172.17.0.7: icmp_seq=2 ttl=64 time=0.119 ms bytes from 172.17.0.7: icmp_seq=3 ttl=64 time=0.118 ms bytes from 172.17.0.7: icmp_seq=4 ttl=64 time=0.101 ms

創建bridge網絡

1、安裝好docker后，運行如下命令創建bridge網絡：docker network create testnet

查詢到新創建的bridge testnet。

2、運行容器連接到testnet網絡。

使用方法：docker run -it –name <容器名> —network <bridge> –network-alias <網絡別名> <鏡像名>

[root@CentOS ~]# docker run -it --name centos-1 --network testnet --network-alias centos-1 docker.io/centos:latest [root@CentOS ~]# docker run -it --name centos-2 --network testnet --network-alias centos-2 docker.io/centos:latest

3、從一個容器ping另外一個容器，測試結果如下：

[root@fafe2622f2af /]# ping centos-1 PING centos-1 (172.20.0.2) 56(84) bytes of data. bytes from centos-1.testnet (172.20.0.2): icmp_seq=1 ttl=64 time=0.158 ms bytes from centos-1.testnet (172.20.0.2): icmp_seq=2 ttl=64 time=0.108 ms bytes from centos-1.testnet (172.20.0.2): icmp_seq=3 ttl=64 time=0.112 ms bytes from centos-1.testnet (172.20.0.2): icmp_seq=4 ttl=64 time=0.113 ms